落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压电流值小电压电流校正仪(耐焊弧校正仪)-(运算机调节)

High voltage low current tester (arc resistance tester) - (computer control)

产品的简称:耐电弧试验机

Product name: electric arc resistance tester

车辆规格:NDH-A

Product model: NDH - A

考虑标准规定:GB/T 1411-2002《物质耐压的材料耐高压得过低电压弧光电流的试验报告》(等同于IEC  61621-1997)及ASTM D495等基准的规范装修设计打造的,并完全符合IEC 149、UL 746A等实验室检测步骤

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

一般符合范围图及技能:

本耐压机是依据应中用同步电机、电器落球回弹试验仪,介电击穿强度测定仪设备和小型电器落球回弹试验仪,介电击穿强度测定仪设备等餐饮行业的电焊工用塑、硅橡胶胶胶和接地性漆等接地性建材的耐脉冲放电耐磨性划分,主中用固状接地性建材如:塑、聚酯薄膜、硅橡胶胶、云母片、工业陶瓷、玻璃窗、接地性油、接地性漆、硬纸板等媒质的耐脉冲放电耐磨性测试方法;

本实践机由算机控住正常运行,不错屏幕上显示现阶段实践的状态及实践時间,实践收场后并存有现阶段实践数据文件,并可网页打印.标准规定进行实验行业报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为高低内置式设计,底端为实际计算机系统,上方为实验箱。

2 本产品设备顺利通过*新自动化调控能力,顺利通过采用程度(IEC或ASTM)可智能开始疲劳试验,并在手机上显示信息试验检测工作和导致。

3 **效果不错,抗要素力量强,测试仪gps精更高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断用时不确定度:乘以 ±10ms

2 调压器体积:2kVA

3 额定的做实验的时候电流:12.5kV

4 检测电阻的精密度:±3%

5 电流值管控精准度:±10%  直流电压侧量定位精度:1.5%

6 电极材料对试件重压:(0.5±0.05)N

7 工业装修材料:钨棒

8 工业距:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 选择大环境室温:(23±2)℃

10 选用区域湿球温度:(50±5)%

11 开关电源:220V±5%  50Hz  10A

12 实验    策略:   行业标准/美标/10 mA 累计/20 mA 连续不断/30 mA不断/40 mA不间断

13 检验软件程序下面的:

程序流程图段

焊弧感应电流

mA

脉冲通断时刻s

各应用程序段持继时s

实验设计总时刻s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

维持通

60

240

5

20

不间断通

60

300

6

30

多次通

60

360

7

40

连继通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

项目编号

各称

总量

提示

01

耐焊弧分析仪仪

这台

 

02

电极片系统

一项

 

03

电极材料支架

一项

 

04

电高压电缆

一系列

 

05

的接地放**

一部

 

06

功率毫安表

一部

 

07

计算机测控工具

一套套

 

08

钢材拉伸试验架

一套

 

09

探针离标准的块

2块

 

10

斜度标淮块

2块

 

11

陶瓷制品片

2片

 

12

喷墨复印机

1台

该品牌

13

电子计算机

1台

品牌标志

14

安全使用表明书

1份

 

15

达标证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 车辆型号查询:

NDH-A    耐弧光应力测试仪-微机把握

NDH-B    耐电弧焊接耐压试验仪-触屏屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪