落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电阻值小电压经过多次实验发现报告仪(耐焊弧经过多次实验发现报告仪)-(确定机调节)

High voltage low current tester (arc resistance tester) - (computer control)

服务名字:耐电弧试验机

Product name: electric arc resistance tester

软件机型:NDH-A

Product model: NDH - A

需求规范:GB/T 1411-2002《物质耐压建材耐高压得很低直流电脉冲充放电的应力测试》(相等IEC  61621-1997)及ASTM D495等准则的追求设计的概念创造的,并不符合IEC 149、UL 746A等检验手段

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

具体符合超范围及实用功能:

本试验检测机是明确应用于电机的、电嚣设备和家庭用的电嚣设备等行业内的技工用朔胶、不饱和环氧树脂胶和电接地带层漆等电接地带层材质的耐弧光效能评估,主应用于物质电接地带层材质如:朔胶、薄膜和珍珠棉、不饱和环氧树脂、黑云母、陶瓷图片、玻璃纸、电接地带层油、电接地带层漆、纸壳等材质的耐弧光效能检验;

本试验台机由测算机管理作业,能够 提示在当下状况调查操作操作程序及调查操作操作日子,调查操作操作完毕后并另存在当下状况调查操作操作数据分析,并可打印出.要求实验设计计划书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为左右两一梯的结构,下面为控制体系,顶部为试验报告箱。

2 本企业产品采用了*新智能化操纵水平,确认选择系统软件(IEC或ASTM)可重新使用耐压,并在手提电脑软件界面显示做实验的时候操作过程和可是。

3 **效果很好,抗骚扰技能强,测式控制精度更高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断事件误差率:不低于 ±10ms

2 调压器余量:2kVA

3 固定疲劳试验工作电压:12.5kV

4 做实验的时候的电压精准度:±3%

5 电压电流把控好误差:±10%  电流量在线测量gps精度:1.5%

6 电级对坯料阻力:(0.5±0.05)N

7 电级板材:钨棒

8 电极片高度:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 选择室内环境热度:(23±2)℃

10 选用自然环境湿球温度:(50±5)%

11 主机电源:220V±5%  50Hz  10A

12 可靠性试验    具体方法:   国家标准下载/美标/10 mA 接连/20 mA 陆续/30 mA连继/40 mA多次

13 应力测试程序流程有以下:

程序代码段

电弧放电电流量

mA

脉冲通断时光s

各过程段一直时候s

校正总时光s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

持续通

60

240

5

20

不间断通

60

300

6

30

间隔通

60

360

7

40

连着通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

编号

标题

数量统计

提示

01

耐电孤测试英文仪

单台

 

02

工业系统性

买套

 

03

金属电极支架

一项

 

04

电源线拖链电缆

五套

 

05

接地装置放**

一瓶

 

06

交流电毫安表

这台

 

07

PC电脑测控免费软件

两套

 

08

试件架

一部

 

09

电极片离基准块

2块

 

10

维度规范标准块

2块

 

11

陶瓷图片片

2片

 

12

喷墨打印纸机

1台

企业

13

测算机

1台

茶叶品牌

14

适用反映书

1份

 

15

合格达标证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 货品参数:

NDH-A    耐电孤实验设计仪-微机操控

NDH-B    耐电弧放电实验仪-触屏屏调节

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪